Docket Logo Printing

Discussions about hardware for POS and Inventory systems. Bar-code readers, Pole Displays, Cash Drawers, Touch Screens.

Moderators: sami, graham

Docket Logo Printing

Postby brittondan » Thu May 27, 2010 10:48 pm

Hi

I need some help with printing a header logo on my dockets.

I have an Epson TM-T88IV printer, i have loaded the logo on to the printer and printed a test and it works great.

Problem is i cannot find the correct code to add to retail man to instruct the printer to output the logo.

My logo is showing as key code 48 48 in the logo utility.

Can anyone please advise how i can get the correct code to print the logo?

Cheers
Dan
brittondan
Standard
 
Posts: 1
Joined: Thu May 27, 2010 10:38 pm

Re: Docket Logo Printing

Postby sami » Mon May 31, 2010 5:26 pm

hi Dan,

Just enter the control codes in Maintenance > Hardware Setup > Pos printer > Header field, you need to convert the codes from hex (or any other format to Ascii) to do that use the Windows Calculator (in Advanced mode) and enter the codes with spaces between them. (example 28 112 1 0 for the Samsung SP350 printer)
sami
Site Admin
 
Posts: 715
Joined: Wed Oct 19, 2005 5:00 pm
Location: Australia

Re: Docket Logo Printing

Postby MaddMatt » Fri May 13, 2011 7:59 pm

Sami,

thanks for the samsung code, it worked like a charm. I was trying epson codes for my POS-X printers and couldn't get it to work.

Receipts look so much nicer with my logo on top :)

MM
MaddMatt
Standard
 
Posts: 27
Joined: Mon Jan 10, 2011 12:59 am

Re: Docket Logo Printing

Postby sami » Mon Jun 20, 2011 5:07 pm

yes you can, just do one number at a time.
If you have an Epson printer, try the following: 29,40,76,6,0,48,69,48,48,1,1
sami
Site Admin
 
Posts: 715
Joined: Wed Oct 19, 2005 5:00 pm
Location: Australia


Return to POS Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron